4 ports FXO/FXS over fiber PCM equipment

4 ports FXO/FXS over fiber PCM device

4 ports 2-wire 4-wire E&M over fiber PCM Multiplexer

4 ports voice PCM equipment

  • Description
  • Inquiry

PCM device 4 ports voice FXO/FXS or 2-WIRE 4-WIRE E&M VOICE over fiber PCM device

PCM-F04 is a kind of point-to-point fiber transmission PCM device which is designed based on special large scale integrated circuits, It have the concise form to realize 4 channel voice (FXO、FXS). Its merits include complete warning function, high integration, low consumption, stable performance and convenient usage.

§1.2 Features

  • Local PCM device can monitor remote device
  • Base on IC of independence intellectual property rights
  • Provide 1-4 channels voice access, support calling indication and reverse polarity charging function
  • Support each site puts the number to each other
  • Voice port supports O port and S port, O port connect with PBX, S port connect with phone users

§1.3 Parameters and index

  • Optical interface

Optical wavelength:      single mode 1310nm/1550nm

Multimode 850nm/1310nm(Optional)

Fiber core NO.:  Double core or single core for option(optional)

Transmitting consumption:  -9dBm/-5dBm

Transmission range:   single mode 0-120km,

Multimode 0-2km(Optional)

Optical receiver receiving sensitivity: <-36 dBm (BER<10-11)

Fiber circuit code:         NRZ code

Connector:    SC/FC(Optional)

 

  • FXS phone por

Ringing voltage:        75V

Ringing frequency:      25HZ

Input impedance:       600Ω(handing)

loss:                  40 dB

 

  • FXO interface

Ringing check voltage:    35V

Ringing check frequency:  17HZ-60HZ

input impedance:         600Ω(handing)

loss:                   40 dB

 

§1.4 Dimension

Desktop device: 145(W)×125(L)×31(H)mm

§1.5 Working condition

Voltage:                  AC180V ~ 260V;DC –48V;DC +24V

Consumption:               ≥5W

Working temperature:    -10°C~50°C

Storage temperature:     -40°C~+70°C

Relative humidity:        95 %

No causticity and impregnated gas, no rising dust, no strong magnetic field disturbing.

 

§1.6 Packaging

Packing list:

1-4 channel voice fiber Multiplexer                           1

Power Line                                                                 1

User’s Reference Manual                                                         1

 

Note: This device have FXO or FXS module for selection, please notify it when order.


Chapter 2 Install Instruction

§2.1The rear panel of Desktop device

PCM-F04 PCM device The rear panel of channel voice fiber Multiplexer

§2.2 LED

There are many LEDs on the rear panel

NameColorStatusDescription
OLOSgreenonFiber signal lost
offFiber signal normal
OLOFgreenonOptical frame loss warming signal
offFiber line signal normal
PWRgreenonpower on
offpower off
  • 2.3 Power supply

Support AC220V/ DC-48V(optional)

  • AC220V: directly insert power wire;
  • The connection of DC power supply:

Common connection “FG”    to the ground;

“DC-48V”  to the negative pole of the power;

“GND”     to the positive pole of the power;

 

Note: the device has a reverse polarity protection measures, equipment will not be damaged when the power supply polarity reverse, and is functional, easy maintenance and installation. (This kind of power supply includes DC48V,DC-48V,DC24V,DC-24V).

§2.4 Optical interface

There are two optical interfaces on the rear panel,FCor SC interface.

“TX”:output interface

“RX”:input interface

§2.5 Phone interface

On the back panel there are two row of RJ45 port(each port mark”Pn”), each port supports 1-2channels of phone access. Equipment supports two interfaces: FXO, FXS. If the equipment is installed FXO modules for FXO interface, to switch over telephone lines can be inserted .If the equipment to set up FXS module for the FXS interface, to be directly inserted into the phone.

Pin definition of FXO/FXS、Magnetic telephone interface:

Chapter3   Installation

  • Unpack, inspect the content carefully. Verify that all items are included with your carton. Contact us or local agent if there is any content missing or damaged.
  • Check power supply configuration. Care about the value of voltage if use DC input.
  • Take following tests before usage:
    • Check loop test buttons on back panel, to see if loose or not, PWR and LOS on, others OFF.
    • FXO port connect with phone line, FXS connect with phone. Can hear alarm when phone off.
  • If indicator LED works normal, unpress all switch on the back panel and power off, set clock, plug FIBER wires, then power on, the device should work normally.
  • If device does not work normally, please refer to chapter 4: trouble shooting. Contact us or our local agent in time if the problem can’t be solved.

 

Chapter 4 Diagnosis and trouble shooting

When work normally, LINK,PWR on, other lights off

Numberphenomena of malfunctionSolution
1PWR offcheck if power connect well
2OLOS onLoop TX(output) and RX(input),if LOS off, check FIBER line
3OLOS off,OLOF onCheck if remote device work on framed status
4phone disconnectedCheck if FXO connect with phone line, FXS connect with phone

 

Chapter 5  Application

fig.7 Typical application 1  General voice business access

fig.8  Typical application 2   Hotline voice  access

4 ports VOICE over fiber PCM multiplexer

4 ports VOICE over fiber PCM multiplexer Solution

 

 

4 ports FXO/FXS over fiber PCM Multiplexer
8 ports FXO/FXS over fiber PCM Multiplexer
16 ports FXO/FXS over fiber PCM Multiplexer
30 ports FXO/FXS over fiber PCM Multiplexer
4 ports FXO/FXS over E1 PCM Multiplexer
8 ports FXO/FXS over E1 PCM Multiplexer
16 ports FXO/FXS over E1 PCM Multiplexer
30 ports FXO/FXS over E1 PCM Multiplexer
360 ports FXO/FXS over E1 PCM Multiplexer

PDH Multiplexer
SDH Multiplexer
E1 Converter
TDM over IP
Modem
PCM Multiplexer
Fiber Media Converter
Fiber Video Converter
SFP fiber module

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Ultra Low Temperature Freezer
Speed Reducer
Rehabilitation Equipment
Fiber Optical Multiplexer






Online Service
Live Chat